Herunterladen Inhalt Inhalt Diese Seite drucken

Frothing Milk; Tips For The Milk Froth - Silvercrest SMA 550 A1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SMA 550 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Frothing milk

Tips for the milk froth

Froth only cow's milk with this appliance. Other types of milk can be frothed
only subject to limitations, or can cause the appliance to overfl ow.
Low fat or skimmed milk does not burn on as easily as whole milk, however,
a too low fat content contributes to the risk that the milk will not be well
frothed. Therefore, when possible use a milk with 3.5% or 1.5% fat content.
Well-cooled milk can be better frothed than less cold.
Do not froth the milk a second time, otherwise it may burn on.
Leave frothed milk to stand for about 30 seconds before you put the foam
onto cappuccino, espresso, etc. Then the larger bubbles burst and the more
liquid milk sinks to the bottom. You can then use the fi ne foam.
Producing frothed milk
1) Place the whisk for heating and frothing 4 onto the drive shaft inside the
carafe. The whisk 8 not required can be clamped and stored in the whisk
holder 2. The other whisk for heating and frothing 4 you can store in a dry
and clean place.
2) Take the carafe from the plinth 6 and pour the milk in. Thereby, fi ll it with as
much milk as is needed so that at least the minimum mark inside the carafe is
reached. However, never fi ll it with milk beyond the upper MAX-marking (
If you do, the appliance may overfl ow. When frothing, the milk volume multi-
plies itself manyfold!
3) Place the carafe on the plinth 6.
4) Put the lid 1 on.
5) Press the Start/Stop button 5. The integrated indicator lamp glows. The whisk
for heating and frothing 4 begins to rotate, it heats the milk and froths it.
6) The appliance switches off and the integrated indicator lamp glows for about
30 seconds as soon as the milk is frothed.
NOTICE
If you want to stop the preparation process before completion, press the
Start/Stop button 5. If you press the Start/Stop button 5 again, the
preparation process will continue.
7) Wait about 30 seconds. In this time the still liquid milk fl ows to the bottom.
8) Remove the lid 1 and pour the milk froth into the desired container to make,
for example, a cappuccino.
Wait about 2 minutes before you heat up another portion of milk.
SMA 550 A1
GB
).
31

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Ian 75438

Inhaltsverzeichnis