Wiring Connection; If Your Car Does Not Have An Iso Terminal - JVC KD-X330BT Bedienungsanleitung

Wiring connection

(for KD-X330BT)
When connecting to an external amplifier, connect its
ground wire to the car's chassis to avoid damaging the unit.
Connecting the ISO connectors on some VW/
Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the
supplied wiring harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
* You can also connect a subwoofer speaker directly without
an external subwoofer amplifier. For setting, 16.

If your car does not have an ISO terminal

We recommend installing the unit with a commercially available
custom wiring harness specific for your car and leave this job to
professionals for your safety. Consult your car audio dealer.
26
Fuse (10 A)
Microphone input jack ( 9)
Yellow (Battery wire)
Red (Ignition wire)
Ignition wire
(Red)
Unit
Battery wire
Red (A7)
(Yellow)
Yellow (A4)
Front/ Rear/Subwoofer output
For 3-way crossover: Mid Range/ Woofer output
If no connections are made, do not let the wire
Light blue/yellow
(Steering remote
control wire)
Pin
A4 Yellow
A5 Blue/White
A6 Orange/white
A7 Red
A8 Black
Purple ]
B1
Purple/black [
B2
Gray ]
B3
Gray/black [
B4
B5 White ]
B6 White/black [
B7 Green ]
ISO connectors
Green/black [
B8
Antenna terminal
come out from the tab.
To the steering wheel
remote control adapter
STEERING
WHEEL
REMOTE
Color and function
: Battery
: Power control
: Car light control switch
: Ignition (ACC)
: Earth (ground) connection
: Rear speaker (right)
For 3-way crossover: Tweeter (right)
: Front speaker (right)
For 3-way crossover: Mid range speaker (right)
: Front speaker (left)
For 3-way crossover: Mid range speaker (left)
: Rear speaker (left) *
For 3-way crossover: Tweeter (left)