Installation/Connection; Wiring Connection - JVC KD-R481 Bedienungsanleitung

INSTALLATION/CONNECTION

Wiring connection

Antenna terminal
Connecting the ISO connectors on some VW/
Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
If your car does not have an ISO terminal
We recommend installing the unit with a
commercially available custom wiring harness
specific for your car and leave this job to professionals
for your safety. Consult your car audio dealer.
Front output
Rear/subwoofer output
Yellow (Battery wire)
Red (Ignition wire)
Ignition wire
(Red)
Unit
Battery wire Red (A7)
(Yellow)
Yellow (A4)
ISO connectors
Rear/subwoofer output
Fuse (10 A)
Light blue/yellow
To the steering wheel
(Steering remote remote control adapter
control wire)
Pin Color and function
A4 Yellow : Battery
A5 Blue/White : Power control
A6 Orange/white : Car light control switch
A7 Red : Ignition (ACC)
A8 Black : Earth (ground) connection
B1 Purple ]
: Rear speaker (right)
B2 Purple/black [
B3 Gray ]
: Front speaker (right)
B4 Gray/black [
B5 White ]
: Front speaker (left)
B6 White/black [
B7 Green ]
: Rear speaker (left) *
B8 Green/black [
* You can also connect a subwoofer speaker directly
without an external subwoofer amplifier. For setting,
11.
When connecting to an external amplifier,
connect its ground wire to the car's chassis
to avoid damaging the unit.
Part list for
installation
(A) Faceplate
(B) Trim plate
(C) Mounting sleeve
(D) Wiring harness
(E) Extraction key
ENGLISH
17