Installation - Electrolux EHS3920 Benutzerinformation

MOD.
PROD.NO.
SER.NO
DATA
Stick it on Guarantee Card and send
1
this part
Stick it on Guarantee Card and keep
2
this part

8. INSTALLATION

WARNING!
Refer to the Safety chapters.
8.1 Installation
WARNING!
Read and follow the instructions
carefully. There is a risk of injury or
damage to the appliance.
• Make sure that there is no damage to
the appliance from the transportation.
Do not connect a damaged appliance.
Speak to the supplier if necessary.
• Install built-in appliances only after you
assemble the appliance into correct
built-in units and work surfaces. Make
sure that built-in units and surfaces
obey the standards.
• Obey all orders and standards in force
in the country where you use the appli-
ance (safety standards, recycling stand-
ards, electrical safety standards etc.)
WARNING!
Risk of injury from electrical cur-
rent.
1 2
MOD.
PROD.NO.
SER.NO
DATA
MODEL MODEL
MOD.
PROD.NO.
0049 SER.NO.
03 IT
MADE IN ITALY
Stick it on instruction booklet
3
• The electrical mains terminal is live.
• Make electrical mains terminal free of
voltage.
• If the fixing bracket is near to the termi-
nal block, do not let the connection ca-
ble come in contact with the edge of
the bracket.
8.2 Electrical connection
• Make sure that the rated voltage and
type of power on the rating plate agree
with the voltage and the power of the
local power supply.
• This appliance is supplied with a mains
cable. It has to be supplied with a cor-
rect plug which can hold the load that
the rating plate rates. Make sure that
you install the plug in a correct socket.
• Always use a correctly installed shock-
proof socket.
• Make sure that there is an access to
the mains plug after the installation.
• Do not pull the mains cable to discon-
nect the appliance. Always pull the
mains plug.
ENGLISH
3
TYPE
230V-50Hz
IP20
9