Electrolux EOV5821 Benutzerhandbuch Seite 29

Removing the oven door and the glass panels
Clean the door with a wet sponge and rub
it dry with a soft cloth. Do not use steel
wool, acids or abrasive cleaning agents
because they can damage the surface.
Installing the door and the glass
panels
When the oven door is clean, install the
glass panels in the opposite sequence.
Make sure that you put the glass panels
back in the correct order.
The middle glass panels have a graphic
located on the top. The third glass panel
has screen printings. In others, it is trans-
parent.
The screen-printing zone must face the
inner side of the door. Make sure that af-
A 1.
2.
B
Press the buttons at the sides of the
door trim (A) on the upper cover and
pull it upwards to remove it.
Hold the inner glass B tightly with
both hands and slide it upwards to
remove it from its initial position. Do
the same with the other glass panels.
CAUTION!
Make sure that you tightly hold the
glasses to prevent them from fall-
ing.
ter the installation the surface of the glass
panel frame is not rough when you touch
it.
ENGLISH 29