Trouble Shooting; Technical Data - Pkm KF4-2KB N Bedienungsanleitung

CAUSES
Break in the power supply.
The sensors are locked.
Liquid on the sensors.
You used your fingertip.
You used unsuitable cookware with
sharp edges.
You used an unsuitable detergent,
e.g. an abrasive.
Some cookware make cracking or clicking noise.
Your cookware is produced with
layers made of different kinds of
metal.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact a service department.
DO NOT REPAIR THE APPLIANCE YOURSELF. If your appliance
does not operate correctly, contact your aftersales service.
Model
Control panel
Material hob
Diameter cooking zones
Power front left
Power back left
Power back right
Power front right

9. TROUBLE SHOOTING

ERROR
The appliance cannot be switched on.
The sensors do not respond.
The sensors are difficult to operate.
The glass ceramic is scratched.
DANGER!

10. TECHNICAL DATA

Please see page 22/23
and change
MEASURES
Check that
connected to the mains. Check the
household fuse box. Is there a power
failure at your place of residence?
Unlock the sensors.
Dry the sensors.
Use the bottom of your top phalanx.
Use suitable cookware.
Use suitable detergents.
This is normal for such a cookware
and does not indicate a malfunction.
Ceramic Hob
Sliding control
Chinese-Glass
1*165/270*165, 2*165, 1*140/220
1000/2200W
1100/2000W
45
the appliance
1200W
1200W
is