Electrical Connection - Pkm KF4-2KB N Bedienungsanleitung

The appliance must be connected to the mains by a qualified
professional, who is familiar with and adheres to the local requirements
and supplementary regulations of your electricity supplier.
1. An all-pole disconnecting device must be incorporated during installation.
Disconnecting devices are switches with a contact opening distance of at least 3
mm. These include LS-switches, fuses and protectors (EN 30335).
2. The cable must be replaced by a qualified professional only when damaged.
3. The cable must not be bent or pressed.
4. Check periodically that the cable is in proper condition.
5. Read the information on the model plate and the connection diagram.

Electrical connection

DANGER!
34