Before Initial Operation - Pkm KG 250.4A+EB Bedienungsanleitung

L 1 Indicates the set temperature of the cooling compartment.
L 2 Indicates enabled SMART-Mode.
L 3 Indicates enabled SUPER-Mode.
B 1 You can set the temperature of the cooling compartment from
level 1 to 5 by pressing this button.
B 2 Press this button to select SMART-mode/Super-Mode/user`s
setting.
WARNING THE THERMOSTAT CONTROLS THE COMPRESSOR
ONLY. You must unplug the appliance to disconnect it from the mains.

4.2 Before initial operation

1. Clean the appliance thoroughly. Be very careful especially inside the appliance
(look at chapter
2. If the accessories inside the appliance are not fitted in their correct position,
replace them according to the image in chapter 4.
3. Use the freezer compartment 24 hours after initial operation of the appliance.
4. The appliance must be connected to the mains properly.
5. If the appliance was disconnected from the energy supply, wait 5 minutes
before you restart it.
6. Do not overfill the appliance
After installation wait 4-6 hours,
before you connect your appliance to the mains!
CLEANING AND MAINTENANCE
Indicators
Buttons
).
39