Clock Functions - IKEA Bejublad Hyllad Handbuch

ENGLISH
Display
7
7
Buttons
Button
Minus, plus
,
Heat-up and residual heat indicator
When you activate an oven function, the
bars in the display
The bars show that the oven temperature
increases or decreases.

Clock functions

Sym- Function
bol
Minute Minder
Time of day
Duration
End
Press again and again to change
the clock function.
Press to confirm the settings of the
clock functions, or wait 5 seconds for
the setting to be confirmed automatically.
1 2
6 5
Function Description
Clock To set a clock function.
To set the time.
come on one by one.
To set a countdown time.
To set, change or check the time of day. Refer to "Setting the
time of day".
To set how long the appliance must operate. First set an oven
function before you set this function.
To set when the appliance must be deactivated. First set an
oven function before you set this function. You can use Dura-
tion and End at the same time (Time Delay) to set the time
when the appliance must be activated and then deactivated.
Time and temperature
1
3
Heat-up and residual heat indicator
2
Water tank (selected models only)
3
Core temperature sensor (selected
4
models only)
Door lock (selected models only)
5
Hours / minutes
6
4
Clock functions
7
When you deactivate the appliance, the
display shows the residual heat indicator
if the temperature in the oven is more than
40 °C. Turn the temperature knob left or
right to show the oven temperature on the
display.
Description
Setting the Duration or End function
during cooking function
1. Press
bol
2. Press + or - to set the minutes.
3. Press
4. Press + or - to set the hour.
again and again until the sym-
or flashes in the display.
to confirm.
11