Danger To Life - Futurelight Color Mega Wave.i Bedienungsanleitung

sufficiently dimensioned and used correctly in accordance with the latest industrial safety regulations (e. g.
BGV C1, BGI 810-3).
Please note: for overhead rigging in public or industrial areas, a series of safety instructions have to be
followed that this manual can only give in part. The operator must therefore inform himself on the current
safety instructions and consider them.
The manufacturer cannot be made liable for damages caused by incorrect installations or insufficient safety
precautions!
Install the safety bond by inserting the quick link in the attachment eyelet on the bottom of the base. Pull the
safety bond over the trussing system etc. Insert the end in the quick link and tighten the fixation screw.
The maximum drop distance must never exceed 20 cm.
A safety bond which already hold the strain of a crash or which is defective must not be used again.
Before taking into operation for the first time, the installation has to be approved by an expert!
Installation via the adapter plate
The fixture's base enables to be mounted in two ways.
The Moving-Head can be placed directly on the stage floor
or rigged in any orientation on a truss without altering its
operation characteristics (see the drawing).
Make sure that the Omega-holder is always in line with the
truss structure when installing the device vertically.
For overhead use (mounting height >100 cm), always install
an appropriate safety bond.
You must only use safety bonds complying with DIN 56927,
quick links complying with DIN 56927, shackles complying
with DIN EN 1677-1 and BGV C1 carbines. The safety
bonds, quick links, shackles and the carbines must be

DANGER TO LIFE!

Screw both clamps via a M10 screw and self-locking nut onto
the respective holes in the adapter plate.
The clamps may either be installed horizontally or vertically.
Insert the four quick-lock
fasteners of the adapter plate
into the respective holes on
the bottom of the device.
Tighten the quick-lock
fasteners fully clockwise.
(1) Adapter plate
(2) Clamp
(3) Safety-rope
(4) Quick-lock fastener
38/58 00090273.DOC, Version 1.0