Description Of The Device; Features - Futurelight Color Mega Wave.i Bedienungsanleitung

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
For overhead use (mounting height >100 cm), always fix the fixture with an appropriate safety-rope. Fix the
safety-rope at the correct fixation points only. The safety-rope must never be fixed at the transport handles!
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly
fastened.
The maximum ambient temperature T = 45° C must never be exceeded.
a
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, crash etc.

DESCRIPTION OF THE DEVICE

Features

Quadcolor Moving Head with two separately tiltable LED bars and six beams with 40W COB LEDs
• With Infinity function for unlimited PAN movement
• TILT movement for each LED bar separately and steplessly adjustable
• Equipped with six 40 W LEDs with RGBW colors
• Flicker-free projection
• Upgrade via optional wireless receiver module for WDMX operation (Wireless Solution - made in Sweden)
• 17, 18, 20 or 39 DMX channels selectable
• Each LED can be controlled individually
• Suitable for pixel mapping applications
• Narrow illumination angle
• Supports RDM (Remote Device Management)
• Functions: built-in programs, shutter sequences, color presets for each LED independently controllable,
countless RGBW colors, dimmer, strobe effect with variable speed, sound-control, Master/Slave operation
• Automatic position correction
• Exact positioning via 16 bit PAN/TILT movement resolution
• Random strobe effect
• DMX-controlled operation or stand-alone operation with Master/Slave function
• Control board with graphic LC display and foil-keyboard for adjusting the DMX-starting address, PAN/TILT
reverse, reset
• The scenes can be modified via the Control Board or via an external controller and loaded into the memory
• Number of scenes can be changed individually
• Software upload by optional accessories via DMX link
• ESDC function (Easy Service Data Check) with battery-buffered control board for operation time readouts
etc. (the Li-Ion battery 3.7V, AAA, 10440 is not included)
• Switch-mode power supply for operation between 100 and 240 Volts
• Power connection via Neutrik PowerCon jack and included power cable
• Feed-through output allows to power up to 8 devices
• DMX control via every standard DMX controller
35/58 00090273.DOC, Version 1.0