Mains Switch - T+A POWER PLANT MK II E-SERIES Betriebsanleitung

RS 232   
E
LINK
   
RC-IN (E 2000)   

Mains switch

Mains input

Interface for firmware-updates and for computer-controlled operation of device
functions through home-automations-systems (CRESTRON, AMX, etc.).
Detailled information regarding the RS232 interface and command tables can
be found in the technical
http://www.taelektroakustik.de.
Control output for  devices with E
If no Music Player / CD Player (E-Series) is present in your system:
Input socket for E2000 remotre control sensor from the remote control set
FBS100.
The primary mains switch is used to isolate the machine completely from the
mains supply.
To operate the amplifier the primary mains switch must be moved to the '1'
position.
This socket is for mains connection.
For correct connection refer to the sections 'INSTALLATION AND WIRING'
and 'SAFETY NOTES'.
download section of the
inputs.
LINK
website

31