Display Operation; The Remote Control; Osd-Menu-Operation - Faytech FT07TMB Bedienungsanleitung

DISPLAY OPERATION

THE REMOTE CONTROL

The remote control functions are similar to the buttons on the display. Before using the remote
for the first time, please remove the thin plastic on the back side to make the batteries connect
and supply the remote control with power.

OSD-MENU-OPERATION

The Menu operation of the faytech display is simple and logical. You have six control buttons.
MENU, +/right, -/left, down(c), up(b), confirm(S).
Pressing MENU brings up the OSD menu and closes it again with another press, in sub menus
you go back one step by pressing MENU.
You navigate with right, left, up, down through the menu. The sub menu is reached by using
the confirm button (S). A value is changed by using +/-.
When a menu option is grey that means it is not available for the actual chosen signal source.
The HDMI, VGA and AV-menu have slightly different picture setting options.
The OSD menu consists of four main menus. You can switch between the main menus with
+/-. In the sub menus (selected by S) you can switch between further sub menus and changing
values by using right(+), left(-) and up(b) and down(c). The menus in the following:

Color Settings
1. Auto calibration:
The display is automatically adjusted to the current
resolution of your graphics card. If you are not
satisfied with the auto setting, you can optimize it
manually.
2. Auto color:
This function will optimize the color of the faytech
displays. You can always change the color of the
display manually.
6. Brightness:
This allows you to increase or decrease the
brightness of the faytech display.
7. Contrast:
This allows you to increase or decrease the contrast
of your display.
8. Color temperature:
You can choose predefined color settings (cool,
warm, medium, SRGB) or make your own color
setting (User).
9. Exit:
Return to the main menu or submenu
39