Name Der Funktion - Yamaha M7CL-32 Bedienungsanleitung

4.2.2 Function Name
FUNCTION NAME
Store "LibStr__"
Recall "LibRcl__"
Unknown Factor Store "LibUnStr"
Unknown Factor Recall "LibUnRcl"
Store Undo (only Scene) "LibStrUd"
Recall Undo (only Scene) "LibRclUd"
4.2.3 Module Name
MODULE NAME
Szene „SCENE___"
Eingangskanal „INCHNNL_"
Ausgangskanal „OUTCHNNL"
Eingangs-EQ „INEQ____"
Ausgangs-EQ „OUTEQ___"
Dynamik „DYNA____"
GEQ „GEQ_____"
Effekte „EFFECT__"
Funktion Nummer
„LibStr__" SCENE 1- 300
INPUT CH LIB 1-199
OUTPUT CH LIB 1-199
INPUT EQ LIB 41- 199
OUTPUT EQ LIB 4- 199
Dynamik-LIB 42- 199
GEQ LIB 1- 199
EFFECT LIB 58- 199
„LibUnStr" SCENE 1- 300
INPUT CH LIB 1-199
OUTPUT CH LIB 1-199
INPUT EQ LIB 41- 199
OUTPUT EQ LIB 4- 199
Dynamik-LIB 42- 199
GEQ LIB 1- 199
EFFECT LIB 58- 199
„LibRcl__" SCENE 0- 300
INPUT CH LIB 0-199
OUTPUT CH LIB 0-199
INPUT EQ LIB 1- 199
OUTPUT EQ LIB 1- 199
Dynamik-LIB 1- 199
GEQ LIB 0- 199
EFFECT LIB 1- 199
„LibUnRcl" SCENE 0
INPUT CH LIB 0
OUTPUT CH LIB 0
INPUT EQ LIB 0
OUTPUT EQ LIB 0
Dynamik-LIB 0
GEQ LIB 0
EFFECT LIB 0
„LibStrUd" SCENE 0
„LibRclUd" SCENE 0
*1) 0:CH1–47:CH48
48:ST IN 1L–55:ST IN 4R
*2) 256:MIX1–271:MIX16
*3) 512:MATRIX1–519:MATRIX8
*4) 1024:STEREO L–1026:MONO(C)
*5) 512:will be used if the recalling or storing data is only one.
*6) 0:RACK1–7:RACK8 If a GEQ is mounted in RACK 1–8.
*7) 0:RACK5–3:RACK8 If an effect is mounted in RACK 5–8.
*8) 1280:CH 1–1327:CH 48
1328:STIN 1L–1335:STIN 4R
(Dynamics2)
Kanal *1) tx/rx
*5)
tx/rx
*1)
tx/rx
*2) *3) *4)
tx/rx
*1)
tx/rx
*2) *3) *4)
tx/rx
*1) *2) *3) *4) *8)
tx/rx
*6)
tx/rx
*7)
tx/rx
0
tx
0
tx
0
tx
0
tx
0
tx
0
tx
0
tx
0
tx
*5)
tx/rx
*1)
tx/rx
*2) *3) *4)
tx/rx
*1)
tx/rx
*2) *3) *4)
tx/rx
*1) *2) *3) *4) *8)
tx/rx
*6)
tx/rx
*7)
tx/rx
*5)
tx
*1)
tx
*2) *3) *4)
tx
*1)
tx
*2) *3) *4)
tx
*1) *2) *3) *4) *8)
tx
*6)
tx
*7)
tx
0
0
4.3 Function call – library edit –
4.3.1 Format (Parameter change)
Receive
Data will be received when [Parameter change Rx] is on and the Device number
of both [Rx CH] and SUB STATUS are matched. The data will be echoed when
[Parameter change ECHO] is on. The corresponding memory/library will be
changed immediately the data is received.
Transmission
Parameter Change Message will be sent in reply to Request. If [Parameter change
ECHO] is on, the message will be sent as it is.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
Digital mixer
GROUP ID 00111110 3E
M7CL
MODEL ID 00010001 11
OTHER DATA
DATA 00000000 00
CATEGORY
(ASCII CODE)
FUNCTION 01001100 "L"
NAME
(ASCII CODE)
01101001 "i"
(ASCII CODE)
01100010 "b"
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
0fffffff ff
(ASCII CODE)
MODULE NAME 0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
(ASCII CODE)
0mmmmmmm mm
number -source start High
DATA 0mmmmmmm mh
number -source start Low
0mmmmmmm ml
number -source end High
0mmmmmmm mh
number -source end Low
0mmmmmmm ml
number -destination start High
0mmmmmmm mh
number -destination to start Low
0mmmmmmm ml
End of exclusive
EOX 11110111 F7
4.3.2

Name der Funktion

FUNCTION NAME
Kopieren „LibCpy__"
Einfügen „LibPst__"
Löschen „LibClr__"
Ausschneiden „LibCut__"
Einfügen „LibIns__"
Bearbeiten rückgängig „LibEdtUd"
4.3.3 Name des Moduls
MODULE NAME
SCENE LIB „SCENE___"
INPUT CH LIB „INCHNNL_"
OUTPUT CH LIB „OUTCHNNL"
INPUT EQ LIB „INEQ____"
OUTPUT EQ LIB „OUTEQ___"
Dynamik-LIB „DYNA____"
GEQ LIB „GEQ_____"
EFFECT LIB „EFFECT__"
M7CL – Bedienungsanleitung
MIDI-Datenformat
285