Mounting; Mounting Precautions; Mounting Locations - Sony SJ300-005 Bedienungsanleitung

3. Mounting

3-1. Mounting precautions

To prevent problems due to noise, mount the scale and slider so that they are connected to
the machine ground.

3-1-1. Mounting locations

Shaft scale and head holder locational relationship
Head movable range
Be sure that the measurement length (ML) is within the value shown in "5. Dimensions."
Mounting when the head movable range exceeds the scale maximum
operating length
Be sure to implement mechanical limiting mechanisms (such as stoppers).
9± ± ± ± ± 3 mm Do not mount the scale bracket any further
/0.35"± ± ± ± ± 0.12" inside from here (head side).
SJ300 Series
Center offset:
± ± ± ± ± 0.5 mm/0.02 in or less
Head holder center and
shaft scale during mounting
ML
5
(E)