General Notices - Scheppach GSE45S Anleitung

• After unpacking, check all parts for possible damage caused by
transportation. In the event of complaints, you must contact the
distributor without delay. Claims at a later stage will not be accepted.
• Check that the delivery is complete.
• Before handling the device, make yourself familiar with it by reading
the operating instructions.
• For accessories, consumables and spare parts, only ever use origi-
nal parts. Spare parts are available from your stockist.
• Include our item number, the device model and year of manufacture
in your order.
Notes
According to the applicable Product Liability Law, the manufacturer of
this device is not liable for damage caused to or by this device in the
event of:
• improper handling,
• non-compliance with the operating instructions,
• repairs by third parties who are not authorised specialists,
• installation and replacement of non-original spare parts,
• use other than for the intended purpose,
• failure of the electrical equipment in the event of non-compliance with
electrical instructions.
General
• The shredder is suited only for private and not for commercial use.
• Never leave the shredder unsupervised when it is connected to the
mains.
• Keep other people and animals away from the shredder when it is in
use.
• Make sure no children are working with the shredder.
• Use the shredder only for its intended purpose.
• If you notice a fault with the shredder, turn it off and put it back into
use only when the problems have been resolved.
• Store the shredder in a dry location.
Before commissioning
• Use the shredder only when it has been assembled correctly and
completely.
• Make sure the connection cables and machine components are in a
faultless condition.
• Make sure the working environment is well lit.
• Make sure that nobody works with the machine who is not familiar
with the user manual.
• Make sure the shredder is positioned on level, solid ground.
• Make sure there are no foreign objects in the feed opening.
Protective clothing
• Always wear hearing protection and safety goggles when working
with the shredder.
• Always wear tight clothes.
• Wear safety gloves.
Commissioning
• Only shred garden waste such as branches and shrubs with the
shredder.
• Make sure no foreign objects such as stones, glass, metal, earth or
plastic get into the shredder. This can lead to severe damage to the
shredder.
• Always ensure you are balanced and in a stable position. Do not lean
over the shredder.
• Protect the connection cables from damage caused by heavy mecha-
nical load, as well as by sharp edges, contact with moving parts,
•
waste such as hedge trimmings and tree prunings, branches, bark or

General notices

We recommend:
Before assembling and commissioning the device, read the entire user
manual.
This user manual is designed to make it easier for you to get to know
your machine and to use it for its intended purpose. The user manual
contains important information about how you can work with the ma-
chine in a safe, professional and economic way, how you can prevent
hazards, save money on repairs, reduce downtimes and increase
the reliability and durability of the machine. In addition to the safety
instructions in this user manual, you must also, without fail, observe the
regulations relevant to your country for the operation of this machine.
Store the user manual in a plastic cover close to the machine, protected
from dirt and moisture. It must be read and followed carefully by every
user before working with the machine. Only those who have been inst-
ructed in the machine's use and taught about associated hazards may
use it. The minimum age requirement must be complied with.
In this user manual, we have marked sections concerning your
safety with this sign:
Safety notices m
corrosive liquids etc.
• Do not put your hands into the feed hopper or the output slot - risk of
injury from the rotating blade cylinder!
• Turn the shredder off if it starts to vibrate in an unusual way.
• Do not work with the shredder in the rain.
• Turn the shredder off and disconnect it from the mains before leaving
the machine.
•
mains.
• Do not use the cable to pull the plug from the socket.
• Caution! The blade cylinder does not come to an immediate standstill
after being turned off.
• Do not tilt the shredder while it is being used or connected to the
mains.
• Make sure the collection box is not too full because this can lead to
kickback by the material.
• Turn the shredder off and disconnect it from the mains when it beco-
mes blocked.
Transport
• Disconnect the shredder from the mains before transporting it.
Electrics
• Only use three-core extension cables with the protective earth
conductor connected.
• Only use the shredder if the durability of the mains has more than
100 A per phase.
• Only use extension leads suitable for outdoor use.
Maintenance, repair and cleaning
• Before all maintenance, repair and cleaning work, make sure that
the blade cylinder has come to a standstill and the machine is
disconnected from the mains.
• Wear gloves when carrying out maintenance, repair or cleaning work.
• Do not modify the shredder's electrical and mechanical components.
Intended use m
pine cones.
•
13
m
GB