Part 2: Functions & Operation; Overview Of Buttons And Controls - Involight Lightcontrol Bedienungsanleitung

If damage results from non-compliance with the intended use and the instructions outlined in this manual, the
warranty will be void and the consequences may be short-circuit, fire or electric shock, or fall-down of the device
(s). Never open the housing of the appliance or the adapter. Unauthorized modifications to the device are
prohibited for safety reasons.
The manufacturer is not liable for damage caused by improper installation and inadequate securing!
Part 2: Functions & Operation:

2.1 Overview of buttons and controls:

Illustration 1.
Controller-Surface:
1.
2.
3.
4.
5.
Pos. Controls
1 Key group /FIXTURES/ with control-
LEDs
2 Slider
3 Key group /PRESETS/
4 Key group /SCENES/ with control-
LEDs
5 Key group /CHASE/ / with control -
LEDs
Function-Keys area1
6
Key /PROGRAM/REC/
Key /PATCH/
Keys /UP/ und /Down/
Keys /MIDI/INSTER/
Keys /TAP/DEL/
Joystick-Area
7
Key /JOG MODE/
Function
Keys 1-16 to select and deselect devices. Activated devices are
indicated by the control LED
Set the DMX values for the selected devices. The current DMX
value is shown in the display.
Freely programmable buttons 1-15 for presets. The DMX
channels of the connected headlights can be freely assigned to
the preset buttons.
Keys 1-15 For switching lighting scenes on and off.
Keys 1-15 to call up a program (user-programmed light
sequences).
For switching the programming mode on and off and for storing
individual scenes or sequences of light sequences.
Shift keys
Activation of MIDI-Control
Function button, switches between pan / tilt control and
Drain speed / fade duration control during the time-controlled
20
9.
11. 10.
. .
6.
8.
7.