Transporting The Work Platform; By Crane; By Forklift; By Truck - Upright MX 19 Betriebsanleitung

T
RANSPORTING THE
B C
Y R A N E
Secure the straps to Tie Down/Lift Points only.
B F
Y O R K L I F T
D A N G E R
!
Forklifting is for transport only.
See specifications for weight of work platform and be certain that forklift is of adequate capacity to lift
the work platform.
Both the MX15 and MX19 may be forklifted from the rear end of the machine between the wheels.They
may also be forklifted from the side using the forklift pockets shown in the diagram.
B T
Y R U C K
Maneuver the work platform into transport
position and chock the wheels. Secure the
work platform to the transport vehicle by
attaching chains or straps of adequate
load capacity to the Tie Down/Lift Points.
C A U T I O N
Overtightening of the chains or straps
attached to the Tie Down/Lift Points may
result in damage to work platform.
060570-028 MX15 / MX19 - Operation Manual
W P
ORK LATFORM
!
Forklift

Transporting the Work Platform

Figure 8: Transporting the Work Platform
Tie Down/Lift Points
Forklift
Pockets
Page 11