General Information; B) Laser - VOLTCRAFT PM-22 Bedienungsanleitung

a) General Information
• The unauthorized conversion and/or modification of the product is inadmissible
for safety and approval reasons (CE).
• The product is maintenance-free for you. Servicing or repair must only be carried
out by a specialist or specialist workshop. The product contains no parts that
require servicing by you. Therefore, do not open it.
• Protect the product from direct solar radiation, strong heat, cold, vibrations or
mechanical stress.
• Handle the product with care. It can be damaged by impact, blows or when
dropped even from a low height.
• Do not place any open sources of fire, such as burning candles, on the device.
• Never pour liquids on electrical devices and do not place any containers filled
with liquids (e.g. vases) on them.
• The product is not a toy and must be kept out of the reach of children. The
product contains small parts and batteries.
• Do not leave packaging material unattended. It may become a dangerous toy for
children.
• If there are any questions that are not answered in this operating manual, contact
our technical support or another expert.

b) Laser

• If you want to perform a measurement by laser with the product, only switch on
the laser when the cable to be measured has been properly connected to the
laser output and the measuring output!
• If you do not need the laser, always close the laser output with the protection cap.
• Never switch on the laser when no cable or the protection cap is screwed on!
26