Hilti DD 150-U Bedienungsanleitung Seite 36

Rated
voltage 100
[V]
Mains 50/60
frequency
[Hz]
Other information about the machine
Rated power input
Max. permissible water supply pressure
Drilling depth
Machine dimensions (L x W x H)
Drill stand dimensions (L x W x H)
Weight of machine in accordance with EPTA procedure
01/2003
Weight of the DD-ST 150 drill stand with combination
base plate and carriage
Rated speed under no load
Protection class
NOTE
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment
of exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period. An estimation of the level of exposure to
vibration should also take into account the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Noise and vibration information for hand-held use (measured in accordance with EN 60745‑2‑1)
Typical A-weighted sound power level
Typical A-weighted emission sound pressure level
Uncertainty for the given sound level
Drilling in concrete (wet), a
Uncertainty (K)
Drilling with HDMU core bit in sand-lime block (dry),
a
h, DD
Uncertainty (K)
Drilling with PCM core bit in sand-lime block (dry),
a
h, DD
Uncertainty (K)
Noise and vibration information for drill stand use (measured in accordance with EN 61029‑1)
Typical A-weighted sound power level
Typical A-weighted emission sound pressure level
Uncertainty for the given sound level
Drilling in concrete (wet), a
Uncertainty (K)
110 GB 110 TW
50/60 50/60
h, DD
h, DD
120 127
60 50/60
2200 W at 230 V
6 bar
450 mm
516 mm x 129 mm x 159 mm
610 mm x 250 mm x 952 mm
8.2 kg
13.3 kg
780 /min (1st gear), 1520 /min (2nd gear), 2850 /min
(3rd gear)
Protection class I (earthed)
98 dB (A)
87 dB (A)
3 dB (A)
7 m/s²
1.5 m/s²
6.5 m/s²
1.6 m/s²
14.5 m/s²
4.5 m/s²
106 dB (A)
93 dB (A)
3 dB (A)
3.5 m/s²
1.5 m/s²
220 230
50/60 50/60
240
50/60
en
29