Radio Basic Operations; Listening To The Radio; To Tune In A Particular Frequency Without Searching - JVC KS-FX950R Bedienungsanleitung

RADIO BASIC OPERATIONS

Listening to the radio

RPT/LO
1
DAB
FM/AM
F1 F2
(FM1) (FM2)
2
To stop searching before a station is received, press the same button you have pressed
for searching.

To tune in a particular frequency without searching:

1 Press FM/AM/DAB repeatedly to select the band (FM or AM).
2 Press and hold
Now you can manually change the frequency while "MANU" is flashing.
¢ or 4
3 Press
• If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and
9 kHz intervals for AM–MW/LW) until you release the button.
To tune in FM stations with only strong signals
Press RPT/LO (Repeat/Local) so that the LOCAL indicator lights up on the display.
Each time you press the button, the LOCAL indicator lights up and goes off alternately.
Note:
This function only works while searching FM stations including SSM preset (see page 6).
2
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3 to listen to an
FM station.
F3
AM
(FM3)
To search stations
of higher
frequencies.
To search stations
of lower
frequencies.
¢ or 4
until "MANU (manual)" starts flashing on the display.
repeatedly until the frequency you want is reached.
1
Selected band (or clock time: see page 28)
appears.
Start searching a station.
When a station is received, searching stops.
5