Radio Basic Operations; Listening To The Radio; Searching A Station Automatically: Auto Search; Searching A Station Manually: Manual Search - JVC KD-SH99R Bedienungsanleitung

RADIO BASIC OPERATIONS

Listening to the radio

You can use either automatic searching or
manual searching to tune into a particular station.
Searching a station automatically:
Auto search
1
Select FM or AM.
FM 1
Selected band appears.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Start searching a station.
When a station is received, searching stops.
8
1 Press SOURCE
repeatedly to select FM
or AM as the source.
2 If necessary, press and
hold M/B (mode/band) for
more than 1 second
repeatedly to select the
FM band number. Each
time you press and hold
the button, the FM band
changes as follows:
FM 2 FM 3
Press ¢
to search
stations of higher
frequencies.
4 to search
Press
stations of lower
frequencies.
To stop searching before a station is received,
press the same button you have pressed for
searching.
To tune into FM stations only with strong signals
1
Press M/B (mode/band) to enter the functions
mode while listening to an FM broadcast.
2
Press LO (local) while still in the functions
mode, so that the LOCAL indicator lights up on
the display.
This function works only while searching FM
stations, including SSM preset.
Each time you press the button, the LOCAL
indicator lights up and goes off alternately.
Searching a station manually:
Manual search
1
Select FM or AM.
1 Press SOURCE
2 If necessary, press and
FM 1
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
repeatedly to select FM
or AM as the source.
hold M/B (mode/band) for
more than 1 second
repeatedly to select the
FM band number. Each
time you press and hold
the button, the FM band
changes as follows:
FM 2 FM 3