Optipoint Display Module/Optipoint Application Module - Siemens optiPoint key module Montageanleitung

optiPoint display module/
optiPoint application module
Safety notes
The optiPoint telephones and add-on devices comply with the stipulated confor-
mity and safety regulations (CE).
• Avoid exposing the equipment to direct sunlight or other sources of heat.
• Protect the equipment from moisture and liquids.
• Never insert objects into openings in the equipment.
Applications
The optiPoint display module can be connected to the following telephones:
optiPoint 410 advance/standard, optiPoint 420 advance/standard.
The optiPoint application module can be connected to the following tele-
phones:
optiPoint 410 advance/standard, optiPoint 420 advance/standard,
optiPoint 500 basic/standard/advance.
The optiPoint display module/optiPoint application module supports you in mak-
ing calls, and its interactive touch-screen display provides many additional, use-
ful functions.
Package Contents
•

1 optiPoint display module/optiPoint application module

• 1 connecting cable
Installation
For installation, see fold-out page 3 (Pos.
1. Disconnect the subscriber line from the optiPoint telephone.
2. Place the telephone
3. Mount the optiPoint display module/optiPoint application module
ping it into the slots
4. Connect the optiPoint display module and the optiPoint telephone with the
supplied connecting cable
5. Reconnect the subscriber line to the optiPoint telephone.
The optiPoint telephone and the optiPoint display module/
optiPoint application module are ready for operation.
optiPoint display module/optiPoint application module
to
on a soft surface with the keypad facing down.
on the optiPoint telephone.
.
).
by snap-
35