Remote Control - WolfVision VZ-C11 Bedienungsanleitung

CODES
Performing a One-Push-Weißabgleich:
Press the LIGHT-key (#18) for 2 sec.
Storing Presets:
Press one of the PRESET keys (#14) for 2 sec.
Storing Images:
Press one of the MEMORY keys (#22) for 2 sec.
By pressing the FREEZE-key (assigned PRESET-key) for 2 seconds, the image is stored in
the next free memory (1-9). If the memory is full, a message appears on the screen.
Activating the on-screen menu:
Press the MENU-key (#19) for 1 sec.
One-push auto focus:
Press both FOCUS-keys (#17) simultaneously.
Manual change to second lamp:
Press the LIGHT-key (#18) for 2 sec.
Filling the memory quickly:
Press the ALL-key (#25) for more than 4 sec.
Then follow the instructions of the on-screen menu (Press MEMORY 1 (#22) for snapshot or
MEMORY 3 (#22) to erase the memory).
Change IR-code:
Change the IR-code in the
IR-code on the remote control too by pressing simultaneously PRESET 1, PRESET 2
and ZOOM TELE (#13) to switch from code A to B, C, D ... A ...etc. For resetting the remote
control to code A simultaneously p
Changing lamp manually:
Press the EXT/INT-key (#24) for 2 sec.
Demo-Mode:
Press the TEXT-key (#16) for 2 sec.
REMOTE
CONTROL:
13
TELE WIDE
12
PRESETS IMAGE TURN
A
14
15
FOCUS IRIS
20
17
EXT / INT ALL
LIGHT TEXT
18 16 24 25
MEMORY
22
HELP
21
POWER
MENU
23
19
on-screen menu "Misc. Settings" (code A is default). Change the
ress PRESET 1, PRESET 2 (#14) and ZOOM WIDE
17
R
(#14)
(#13) .