Installing The Bracket With Hp Head - ACO Lipumax-P Gebrauchsanleitung

3.3.5 Installing the bracket with HP head

IMPORTANT Before the bracket is installed the pit excavation must be backfilled up to
this level, Chap. 3.3.11 „Backfill pit".
The bracket with the mounted HP head is enclosed as a loose item with the as-delivered
separator and must be installed in the housing on site.
Requirements:
Leg of the bracket must be facing
■
downwards between the two dogging
elements in the housing.
The bracket is to be positioned less than
■
90 ° relative to the inlet and outlet axis.
Unscrew star handle from threaded pin.
Î
Lift off bracket part from threaded pin.
Î
Place the complete bracket in the
Î
housing and use the carrier pipe to
position it on the dogging elements.
Grease separators Lipumax-P -B, -D, -DM, -DA
Installation
10
99/ 144