ACO Lipumax-P Gebrauchsanleitung Seite 88

Grease separators Lipumax-P -B, -D, -DM, -DA
Product Description
88/ 144
Type Equipment
Lipumax P-DM (21) = "Sampler" connection
(22) = Submerged outlet pipe
(23) = Housing
(24) = Submerged "disposal" tube
(25) = Submerged inlet pipe with baffle
(27) = Compression fitting
(28) = Connection port for on-site inlet pipe
(30) = Nameplate
(31) = Raising system, load class A15, B125 or D400
(32) = Compression fitting
** Additional equipment and features compared to equipment level 1
Lipumax P-DA (4) = Filling device with solenoid
(5) = Pipe parts, "filling pipe" with odour trap
(6) = "Solenoid valve" connection
(9) = Control with 1.5 m connection cable incl. CEE
(11) = High-pressure unit (HP unit) "Inner housing cleaning"
(12) = "HP head" connection cable
(14) = High-pressure hose (2.7 m long)
(15) = "Supply pipe" parts
(17) = Motor-driven HP orbital cleaning head (HP head)
(18) = High-pressure hose (10, 20 or 30 m long)
(20) = Connection port for on-site outlet pipe
(21) = "Sampler" connection
(22) = Submerged outlet pipe
(23) = Housing
(24) = Submerged "disposal" tube
(25) = Submerged inlet pipe with baffle
(27) = Compression fitting
(28) = Connection port for on-site inlet pipe
(30) = Nameplate
(31) = Raising system, load class A15, B125 or D400
(32) = Compression fitting
(33) = Remote
*** Additional equipment and features compared to equipment level 2
valve***
cable***
control***
plug***