ACO Lipumax-P Gebrauchsanleitung Seite 87

22 = Submerged outlet pipe
23 = Housing
24 = Submerged "disposal" tube
25 = Submerged inlet pipe with baffle
26 = Inlet pipe (on-site)
27 = Compression fitting
28 = Connection port for on-site inlet pipe
29 = On-site "disposal pipe"
Numbers in brackets „()", see diagram of the grease separator (example equipment level
3), page 14: Figure: „Lipumax P-DA".
Type Equipment
Lipumax P-B (20) = Connection port for on-site outlet pipe
(21) = "Sampler" connection
(22) = Submerged outlet pipe
(23) = Housing
(25) = Submerged inlet pipe with baffle
(28) = Connection port for on-site inlet pipe
(30) = Nameplate
(31) = Raising system, load class A15, B125 or D400
Lipumax P-D (20) = Connection port for on-site outlet pipe
(21) = "Sampler" connection
(22) = Submerged outlet pipe
(23) = Housing
(24) = Submerged "disposal"
(25) = Submerged inlet pipe with baffle
(27) = Compression
(28) = Connection port for on-site inlet pipe
(30) = Nameplate
(31) = Raising system, load class A15, B125 or D400
(32) = Compression
* Additional equipment and features compared to the basic version
Lipumax P-DM (4) = Filling device with ball
(5) = Pipe parts, "filling pipe" with odour
(9) = Small housing with switched-mode power
(11) = High-pressure unit (HP unit) "Inner housing cleaning" with 5 m connection
(12) = "HP head" connection cable
(14) = High-pressure hose (2.7 m
(15) = "Supply pipe"
(17) = Motor-drive HP orbital cleaning head (HP
(18) = High-pressure hose (10, 20 or 30 m
(20) = Connection port for on-site outlet pipe
Grease separators Lipumax-P -B, -D, -DM, -DA
30 = Nameplate
31 = Raising system, load class A15, B125 or D400
32 = Compression fitting
33 = Remote control
34 = Connection box (optional)
35 = On-site "ventilation line"
36 = On-site "ventilation connection"
pipe*
fitting*
fitting*
valve**
cable incl. CEE plug**
**
long)**
parts**
Product Description
trap**
supply**
head)**
long)**
87/ 144