Load Preset Menu - IMG STAGE LINE MFE-212 Bedienungsanleitung

After selecting Edit Notch Left/Right and pressing ENTER, the user accesses the
menu.
Using the encoder NAVIGATION, it is possible to select the required manual notch
filter (the number is shown in the upper right); in order to edit the filter
parameters, press ENTER, then it is possible to select the parameter (selection is
shown within < >).
Use the encoder VARIATION to vary the parameter value.
There are 2 parameters for editing the frequency: FA and FF.
When FA (Frequency Adjust) is selected, the frequency value varies with 1/3 oct
steps.
When FF (Frequency Fine) is selected, the frequency value varies with 1/70 within
the selected 1/3 octave.

LOAD PRESET MENU

Here, it's possible to select and load one of the 4+16 available presets.
To load a preset, select it using the encoder VARIATION. During the navigation, it
is possible to visualize the preset name (max. 8 characters) and its position.
If the selected preset is not the current one, the preset number will blink.
26