Edit Notch Left/Right Menu - IMG STAGE LINE MFE-212 Bedienungsanleitung

Turning the encoder NAVIGATION, the screen will display:
Each parameter can be varied using the encoder VARIATION:
When filters work in Var mode, a Slow of Fast Release time can be chosen, for the
Variable notches release: when Slow is selected, a placed filter is released every 2
seconds; when Fast is selected, each 300ms.
A Sharp or Fast mode can be selected for the Feedback elimination: Sharp forces
the system to set precise filters at the expense of the speed in eliminating the
feedback itself; Fast allows a faster elimination, using less sharp filters.
To exit this submenu, press QUIT.

EDIT NOTCH LEFT/RIGHT MENU

Here, it is possible to edit all the manual notches formerly selected using the
utility function. If there are no manual notches (automatic notches = 12) and the
user tries to access the submenu, the display will briefly show the following:
Otherwise, the following will be displayed:
The user can edit for each notch: Attenuation, Frequency and Q (1/Bandwidth).
Attenuation varies between -45dB and 0dB with 1 dB steps.
Frequency varies between 20Hz and 20 kHz with 1/70 octave steps.
Q can be 1/70, 1/20, 1/10, 1/5 octave.
25