1.Search feedback L&R
3.Search feedback R
5.Edit Notch L
7.Load preset
9.Copy channel L to R
11.Reset Notch Manual L
13.Reset Notch Auto L
15.View Notch Filter L
17.Password
To select one of the menu fields, use the encoder NAVIGATION. To access the
submenus, use ENTER; to exit use QUIT. Those keys are also used to confirm /
cancel user choices.
SEARCH FEEDBACK L & R/L/ R
The user has the possibility to select the channel to be monitored simply accessing
one of the 3 functions: Search L&R, only L, only R.
The screen displays (case SEARCH FEEDBACK L & R):
The upper row of the display shows information with regard to the LEFT channel;
the lower row shows information with regard to the RIGHT channel.
The available information is:
SENS: shows the system sensitivity to the feedback phenomenon. Its values are
between 1 (lowest sensitivity) and 16 (highest sensitivity)
RS: automatic notch filters reset.
The "_" symbol indicates the notch filter is automatic and it is flat.
The "M" symbol indicates the notch filter is manual.
2.Search feedback L
4.Utility Function
6.Edit Notch R
8.Save preset
10.Copy channel R to L
12.Reset Notch Manual R
14.Reset Notch Auto R
16.View Notch Filter R
18.Start Setting
22