Troubleshooting - Topcom BUTLER 4450 Gebrauchsanweisung

Topcom Butler 4450/Twin/Triple/Quattro
• To delete during messages, press '5'
• To skip forward during messages, press '6'
• To set answer On/Off, press '7'
• To hear Outgoing messages menu, press '8'
• To set a new security code, press '9'
• To hear main menu, press '1'
You are not obliged to play the main menu before activating any function.
7.3.3 Outgoing Message Menu
Press '8' in the main menu. The unit shall announce 'Outgoing message menu' followed by
the outgoing message menu.
• To play OGM, press '2'
• To record 'answer and record OGM', press '3'
• To record 'answer and only OGM', press '4'
• To select 'answer and record OGM', press 5
• To select 'answer and only OGM' press '6'
• To hear OGM menu again, press '8'
• To hear mean menu again, press '1'
7.3.4 Setting the security code
• Press '9' in the main menu. The unit shall ask to press '*' to set a new VIP code.
• Press '*'
• Enter the new security code after the tone.
• Press # to confirm
• The unit shall ask to press '1' for main menu.
8

Troubleshooting

Symptom
No display
No tone
The icon flashes
26
Possible cause
Batteries uncharged
Handset turned OFF
Telephone cord badly
connected
The line is occupied by
another handset
Handset out of range
Solution
Check the position of the
batteries
Recharge the batteries
Turn ON the handset
Check the telephone cord
connection
Wait until the other handset
hangs up
Bring the handset closer to
the base
Topcom Butler 4450/Twin/Triple/Quattro