Danfoss Link RS Installationsanleitung Seite 7

Installation Guide
Installation
VIFZA25X
Danfoss Link™ RS
1 . Turn the device around so the
back is facing you .
2 . Remove the back panel by gently
pressing your thumbs on the
panel and pull downwards .
3 . Fix the back panel to the wall
either help of screws or adhesive
on the desired destination .
4 . Insert the batteries .
5 . Install the Danfoss Link™ RS front
by gently letting it slide on the
back panel again .
© Danfoss 04/2010
GB
7