Factory Reset - Danfoss Link RS Installationsanleitung

Installation Guide

Factory reset

VIFZA25X
Danfoss Link™ RS
1 . Remove the Danfoss Link™ RS
front from the back panel .
2 . Turn the Danfoss Link™ RS around
so the back is facing you .
3 . Remove one of the batteries .
4 . Press and hold the button while
reinserting the battery until LED
flashes red (approx . 5 seconds) .
5 . Replace the Danfoss Link™ RS
front again on the back panel .
6 . The Danfoss Link™ RS is now reset .
5 sec.
© Danfoss 04/2010
GB
9