Adding Device; Perform Network Test - Danfoss Link RS Installationsanleitung

Installation Guide Danfoss Link™ RS

Adding device

Connection of the RS Room Sensor
to a system is made from the Danfoss
Link™ CC Central Controller .
For further information, see
the Danfoss Link™ CC
instruction manual:
Max. 1 m
Configuration 6:
Adding devices.

Perform network test

When the RS unit has been
added to the Danfoss Link™
CC Central Controller, a
network test should be
performed .
For more information on
network tests, see the
Danfoss Link™ CC instruction
manual: Configuration 8:
Perform network test .
At the end of the network test you will be informed that the
test is waiting for signal from the RS unit .
Go to the RS unit and press the LED button for 5 seconds to
force the signal .
8
VIFZA25X © Danfoss 04/2010