Product Description - VOLTCRAFT 12 07 47 Bedienungsanleitung

Any use other than the one previously described can
lead to damages on the product. Moreover, this
involves dangers, such as e.g., short-circuit, fire, elec-
tric shock, etc. No part of the product may be modified
or rebuilt and the housing must not be opened.
Always observe the safety instructions and technical data.

Product Description

The multitester MS18-2 is the further technical development of the
successful MS 18. Next to the functions of the MS-18 the MS 18-2
has also been equipped with power saving measuring electronics,
through which the current consumption could be lowered by 70 per-
cent. MS18-2 furthermore has a temporary memory function which
delays the LED display a further 0.5 to 2 seconds in order to achieve
precise and definite measuring results.
With the MS 18-2 you can check voltage-carrying electric lines and
part, whether alternating voltage is applied. This can be carried out
either with direct contact or contactless (indirect). The indirect mea-
suring can be especially helpful with insulated lines and parts. More-
over, the polarity of direct voltage sources can be determined.
When using the device as a continuity tester for circuit track con-
ductors, chassis earth connections, fuses, power cords, light bulbs,
switches and many more can be tested on their function (continuity)
when off circuit. A further area of use is the testing of components
such as diodes, rectifiers, condensers, transistors (NPN/PNP), coils,
etc. but also the testing of microwaves for leakage. The display is
via a built-in red LED.
13