Product Description; Delivery Content - VOLTCRAFT MS-18/2 Bedienungsanleitung

4. Product description

The multitester MS18-2 is the further technical development of the successful MS 18. Next to the functions of the
MS-18 the MS 18-2 has also been equipped with power saving measuring electronics, through which the current
consumption could be lowered by 70 percent. MS18-2 furthermore has a temporary memory function which delays the
LED display a further 0.5 to 2 seconds in order to achieve precise and definite measuring results.
With the MS 18-2 you can check voltage-carrying electric lines and part, whether alternating voltage is applied. This
can be carried out either with direct contact or contactless (indirect). The indirect measuring can be especially helpful
with insulated lines and parts. Moreover, the polarity of direct voltage sources can be determined. When using the
device as a continuity tester for circuit track conductors, chassis earth connections, fuses, power cords, light bulbs,
switches and many more can be tested on their function (continuity) when off circuit. A further area of use is the test-
ing of components such as diodes, rectifiers, condensers, transistors (NPN/PNP), coils, etc. but also the testing of
microwaves for leakage. The display is via a built-in red LED.

5. Delivery content

• Multitester MS 18-2
• two round cell batteries
• Operating instructions
Up-to-date operating instructions
1
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
13