Omnitronic DMS-1150 Bedienungsanleitung Seite 24

encoder the higher the scanning-speed. In pause-mode, the current frame is repeated as soon as you turn
the Search-encoder.
5. TRACK-BUTTONS
Via the Track-buttons, you can select the desired track. Please refer to the explanations under 6.5 Selecting
a track via the Track-buttons.
6. LOOP IN/REALTIME CUE-BUTTON
By pressing the In-button, you can memorize the Cue-point. Additionally, you can set the starting point of a
sequence. Please refer to the explanations under 6.9 Memorizing a sequence (Loop-function) and 6.8
Interactive scratch-wheel.
7. LOOP OUT-BUTTON
Press the Loop Out-button to set the end point of the sequence. Now, the CD-player repeats the sequence
between the two points until you press the Loop Out-button once more.
8. RELOOP-BUTTON
Press the RELOOP-button, to resume the sequence between points A and B. Press the Loop Out-button to
exit the sequence.
9. FOLDER / PARAMETER-BUTTON
Via the Folder-button, you can select between FOLDER and PARAMETER mode.
(1) In Parameter mode, you can adjust effect time and ratio.
(2) In Folder mode, you can select the titles and folders of a CD with MP3 format.
10. CUE-BUTTON
(1) In pause-mode, you can cue by pressing and holding the Cue-button. As soon as you release the Cue-
button, the player returns to the track-start or the Cue-point.
(2) If you press the Cue-button during playback, the player returns to the track-start or the Cue-point and
goes into Pause-mode. Please refer to the explanations under 6.7 Cueing.
11. PLAY/PAUSE-BUTTON
With the Play/Pause-button, you can start the playback and stop it again. Please refer to the explanations
under 6.4 Play/Pause.
12. SAMPLER-BUTTON
By pressing the Sampler-button (Sampler LED on), you can recall a sample you memorized on one of the
Bank-buttons before. You can select between Continuous-mode and One-shot-mode. The memorized
sequence can e.g. be mixed as a sound effect with any title replayed or can be played on its own in pause
mode. Please refer to the explanations under 6.10 Sampler-mode.
13. MEMORY-BUTTON
With this button, you can memorize the current Cue-point, the current sample or the sample-parameter via
one of the four Bank-buttons. Press the Memory-button (LED on) and the desired Bank-button. Please refer
to the explanations under 6.7 Cueing and 6.10 Sampler-mode.
You can memorize up to 4 Cue-points and samples with sample-parameters of different titles and recall them
via the respective Bank-button.
Please note that the maximum sample-length is 5 seconds.
In the Effect-mode, you can memorize the adjusted effect parameters by adjusting the parameter and
pressing the Memory-button.
You can recall all memorized Cue-points, samples and effect-parameters from up to 500 CDs by switching
the CD-player on, pressing the Memory-button (LED on) and inserting the respective CD.
14. EJECT BUTTON
Via the EJECT-button, you can stop and eject the CD. Please refer to the explanations under 6.2 CD Slot In.
15. 4/8/16/100%-BUTTONS
With these buttons, you can select the speed-adjusting range between +/- 4 %, +/- 8 %, +/- 16 % or
+/- 100 %. Please refer to 6.6 Adjusting the playback-speed.
24/64 10602426_V_1_0.DOC