BYK wave-scan dual Betriebsanleitung Seite 36

Statistic
If the number of measurements is set
to greater than 1, statistics values are
shown in the display after
measurement.
You can select the values to be
displayed in the Statistic submenu.
The current setting is identified by a
dot at the end of the line.
Use the scroll wheel to move the
cursor to the desired setting and press
the operate button. The selection is
accepted and the instrument returns to
the previous menu.
Average
Display of the arithmetic mean x.
Average/Range
Display of the arithmetic mean x and
the difference between the maximum
and minimum value.
Average/St.Dev.
Display of the arithmetic mean x and
the standard deviation.
Average/Std.Err.
Display of the arithmetic mean x and
the standard error
Configuration
.
Standard deviation:
Standard Error:
2
s
ε
=
n
10
35