Network And Usb Connection; Connecting To The Network Terminal And Usb/Bd Storage Terminal - Yamaha BD-S667 Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

■ Connecting to the NETWORK terminal and USB/BD STORAGE terminal

– PC contents can be played back by connecting this Player to the network.

– You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-Live

compatible discs. Refer to page 23 regarding further information on BD-Live functions.

– You can connect a USB memory device (2 GB or greater and formatted with FAT 32/16) to the USB/BD

STORAGE terminal to save the BD-Live data or to upgrade the software of this Player.

– Firmly connect a network cable (commercially available) and a USB memory device (commercially available) to

the NETWORK terminal and USB/BD STORAGE terminal.

– Use only an STP (shielded twisted pair) network cable.

– When using the internet, a broadband internet connection as shown below is required.

– Connect the other connector of the network cable to the hub/broadband router.

– The USB memory device connected to the USB port on the front panel works same as the one connected to the

USB/BD STORAGE terminal on the rear panel.

Before using the USB memory device

CAUTION:

– Do not remove the USB memory device

or unplug the power cable while the

operations for BUDA (p. 35) or software

upgrade are being performed.

– Do not use a USB extension cable when

connecting a USB memory device to the

USB/BD STORAGE terminal of the

Player. Using a USB extension cable

may prevent the Player from performing

correctly.

Note

– Yamaha cannot guarantee that all brands'

USB memory devices will operate with

this Player.

Notes

– When using a broadband internet

connection, a contract with an internet

service provider is required. For more

details, contact your nearest internet service

provider.

– Refer to the operation manual of the

equipment you have as the connected

equipment and connection method may

differ depending on your internet

environment.

– Use a network cable/router supporting

10BASE-T/100BASE-TX.

After connecting

– When you set the Network setting manually, refer to "Network" (p. 27).

– To play back the PC contents on your network, refer to "Using network content" (p. 19).