Yamaha DPX-1300 Bedienungsanleitung Seite 24

Selecting an input signal
Selecting a display aspect for a projection image
The display aspect parameter sets the ratio of height to width the unit uses to project an image for an input signal.
Remote cotrol Main unit
cursor button
AUTO
V. POS ZOOM FOCUS
IRIS SETTING PATT
ESCAPE
ESCAPE MENU
PATTERN
ASPECT
ASPECT INPUT
RESET HIDE
ASPECT
STILL LIGHT
button
INPUT
S VIDEO A HDMI
VIDEO B DVI
button
D4
MEMORY
1 2 3
4 5 6
22
1. Press the ASPECT button.
The display aspect selection menu appears
on the display.
STANDBY/ON
MENU
SETTING
INPUT
LAMP COVER TEMP FAN
2. Use the h or g button
to select a suitable display aspect
setting, then press the
If you select [Special] or [Through],
pressing the + button displays the submenu.
Memo
• The display aspect you can use depends on the current input signal. When the input
signal contains display aspect information, set the display aspect parameter to
[Auto] to detect the appropriate display aspect setting automatically.
• You can also use the [Display Aspect Ratio] page in the menu screen to select a
display aspect. (
Display Aspect Ratio
Auto
Normal
Squeeze
Smart Zoom
Zoom
Special
Through
Display Aspect Ratio
Auto
button.
Normal
Squeeze
Smart Zoom
Zoom
Special
Through
page 27- 47)