Connections - Yamaha YST-SW45 Bedienungsanleitung

Never plug in the subwoofer and other audio/video components until all connections are completed.
• When making connections between this unit and other components, be sure all connections are made firmly and correctly; L (left)
to L, R (right) to R, + to + and – to –.
• This unit can be connected to either the speaker terminals or the line output (pin jack) terminals of the amplifier. Choose one of
the connections shown below according to your audio system. Refer also to the owner's manuals supplied for your audio system.
CONNECTING TO SPEAKER TERMINALS OF THE AMPLIFIER
Using one unit
When your amplifier has one set of speaker terminals
• Disconnect your main speakers from the amplifier if connected, and connect them
to the speaker terminals of this unit.
Right speaker
This unit
When your amplifier has two sets of speaker terminals
Right speaker
4

CONNECTIONS

OUTPUT
TO SPEAKERS
OUTPUT INPUT2 AUTO
TO SPEAKERS STANDBY
FROM AMPLIFIER
INPUT1
LOW HIGH
OFF
FROM AMPLIFIER
INPUT1
POWER
ON
OFF
To AC outlet
This unit
OUTPUT INPUT2 AUTO
TO SPEAKERS STANDBY
LOW HIGH
OFF
FROM AMPLIFIER
INPUT1
POWER
ON
OFF
To AC outlet
Speaker terminals
A B
INPUT2 AUTO
STANDBY
LOW HIGH
OFF
Speaker terminals
OUTPUT INPUT2 AUTO
STANDBY
TO SPEAKERS
LOW HIGH
OFF
FROM AMPLIFIER
INPUT1
(Both A and B speaker outputs
must be ON.)
Left speaker
Amplifier
Amplifier
Left speaker