Advanced Yamaha Active Servo Technology - Yamaha YST-SW45 Bedienungsanleitung

ADVANCED YAMAHA ACTIVE SERVO TECHNOLOGY

The theory of Yamaha Active Servo Technology has been
based upon two major factors, the Helmholtz resonator and
negative-impedance drive. Active Servo Processing
speakers reproduce the bass frequencies through an "air
woofer", which is a port or opening in the speaker's cabinet.
This opening is used instead of, and performs the functions
of, a woofer in a conventionally designed speaker system.
Thus, signals of low amplitude within the cabinet can,
according to the Helmholtz resonance theory, be output from
this opening as waves of great amplitude if the design is
such that the size of the opening and the volume of the
cabinet are in the correct proportion to satisfy a certain ratio.
In order to accomplish this, moreover, the amplitudes within
the cabinet must be both precise and of sufficient power
because these amplitudes must overcome the "load"
presented by the air that exists within the cabinet.
Thus it is this problem that is resolved through the
employment of a design in which the amplifier functions to
supply special signals. If the electrical resistance of the voice
coil could be reduced to zero, the movement of the speaker
unit would become linear with respect to signal voltage, and,
to accomplish this, a special negative-impedance output-
drive amplifier for subtracting output impedance of the
amplifier is used.
High-amplitude
bass sound
10
Cabinet
Port
Advanced Negative-
impedance Converter
Active
Servo
Processing
Amplifier
Signals of low amplitude
By employing negative-impedance drive circuits, the
amplifier is able to generate precise, low-amplitude low-
frequency waves with superior damping characteristics, and
these waves are then radiated from the cabinet opening as
high-amplitude signals. The system can, therefore, by
employing the negative-impedance output drive amplifier and
a speaker cabinet with the Helmholtz resonator, reproduce
an extremely wide range of frequencies with amazing sound
quality and less distortion.
The features described above, then, are combined to be the
fundamental structure of the conventional Yamaha Active
Servo Technology.
Our new Active Servo Technology — Advanced Yamaha
Active Servo Technology — adopted Advanced Negative
Impedance Converter (ANIC) circuits, which allows the
conventional negative impedance converter to dynamically
vary in order to select an optimum value for speaker
impedance variation. With this new ANIC circuits, Advanced
Yamaha Active Servo Technology can provide more stable
performance and improved maximum sound pressure
compared with the conventional Yamaha Active Servo
Technology, resulting in more natural and energetic bass
reproduction.
Air woofer
(Helmholtz resonator)
Signals