Initial Start-Up; Charging The Battery - Silvercrest SBH 3.0 B1 Bedienungsanleitung

Initial start-up

Charging the battery

Before initial start-up or if the integrated battery is flat,
charge the headset up as follows:
 Connect the USB charging cable (F) to the charging
connection (3) and to an unused USB connection on
your computer (which must be switched on) or a USB
power supply pack (not included in the package
contents).
 The LED (2) lights up orange while the battery is
charging and goes out once the battery is fully
charged.
The headset should not be covered while charging, as the
device can heat up in the process.
The LED (2) will flash orange if the battery needs
charging.
SilverCrest SBH 3.0 B1
English - 17