Connecting The Headset For The First Time - Silvercrest HS1000 Bedienungsanleitung

1 Headband
2 Right ear cushion
3 Left ear cushion
4 Microphone socket with the microphone connected
5 Connecting cable
6 Bass control
7 3D Surround Sound control
8 Volume control
9 Microphone switch
10 Microphone indicator light

Connecting the headset for the first time

Make sure that the program you wish to use (a game, music playback,
telephony etc.) has not yet been started. If the program has already been
started, close it before connecting the gaming headset to the computer.
Plug the USB connector of the gaming headset into a free USB 2.0 port
on your powered-on computer. The necessary driver will be installed
automatically.
After a short time the operating system will inform you that the new
hardware can now be used. The gaming headset is now ready for use.
Start the program that you wish to use (e.g. music playback), and check
that you can hear the sound via the gaming headset's ear pads.
If you no longer wish to use the gaming headset, and instead want to use
the loudspeaker which was previously active, first close the program you
were using. Then disconnect the gaming headset's USB plug from the
computer's USB port. Then start the application again.
Silvercrest Gaming Headset HS-1000
English - 9