Inhaltsverzeichnis
Werbung
TUNER
Tuning to Preset Stations
• Press PRESET 4 or 3 (or PREV ¡ or NEXT ™ on
the remote control) to select the desired preset
CD TAPE
1
SHUFFLE
RECORD
FM
MW
FRONT
2
SWLW
BACK
number.
RECORD
STEREO
HSD
3
TIMER SET
NR
DUBBING
– The preset number, frequency and waveband
BAND
SHUFFLE
TIMER
appear on the display.
PRESET
0 Record Tape
1 As soon as you press 0 RECORD, the current
sound will be recorded on TAPE 2, provided a
tape suitable for recording is loaded.
2 To stop recording, press 9 (or STOP 9 on the
remote control).
Ç
Receiving RDS radio station
RDS (Radio Data System) is a broadcasting service
that allows FM stations to send additional
information along with the regular FM radio signal.
This additional information can contain:
• STATION NAME : The station name is
displayed.
• FREQUENCY : The frequency of the station is
displayed.
• PROGRAM TYPE : The following program types
exist and can be received by your tuner: News,
Affairs, Info, Sport, Educate, Drama, Culture,
Science, Varied, Pop M, Rock M, M.O.R.
(middle of the road music), Light M, Classics,
Other M, No type.
• RADIO TEXT (RT) : Text messages appear in the
display.
CASSETTE DECK
Tape Playback
1 Press TAPE 1/2 (or TAPE 1 or TAPE 2 on the
CD TAPE
1
SHUFFLE
RECORD
FMMW
FRONT
2
SW
LW
BACK
RECORD
STEREO
remote control) to select either TAPE 1 or TAPE 2.
3
HSD
TIMER SET
NR
DUBBING
BAND
SHUFFLE
2 Load the cassette into the desired cassette deck.
TIMER
PRESET
3 Press B (or PLAY 2 on the remote control) to
start playback.
3a (For Tape 2 only.)
CD TAPE
SHUFFLE
RECORD
1
FMMW
FRONT
2
SW
LW
BACK
Press SIDE (or SIDE on the remote control) to
RECORD
STEREO
HSD
3
TIMER SET
NR
DUBBING
change the direction of the play mode.
BAND
SHUFFLE
TIMER
– The
or
flag appears in the display,
PRESET
FRONT
BACK
depending on the side selected.
3b (For Tape 2 only.)
Press PLAY MODE to select the different type of
play mode (see continuous playback).
CD TAPE
1
SHUFFLE
4 Press 9 (or STOP 9 on the remote control) to end
FMMW
2
SW
LW
RECORD
STEREO
TIMER SET
3
playback.
DUBBING
BAND
SHUFFLE
TIMER
Note : When the tape has stopped playing, the set
PRESET
will switch to the standby mode automatically after
15 minutes if no button is pressed.
Continuous Playback (only on TAPE 2)
The PLAY MODE enables you to select the different
play modes.
å : recording or playback on one side of the
cassette in the normal or reverse direction.
The tape stops at the end of one side.
∂ : recording or playback on both sides of the
cassette; first in one direction and then in the
reverse direction. The tape then stops.
∫: continuous playback on both sides of the
cassettes up to a maximum of 5 times per
side unless you press 9.
When you have tuned to an RDS station, the RDS
Ç
logo (
) and the station name will appear on the
display:
PROGRAM
PLAY
DBB
MODE
• The display normally shows the radio station
PROGRAM
AMPM
TIMER
SET CLOCK
SIDE
name if available.
RDS
MODE
CLEAR
By repeatedly pressing RDS MODE you can
TUNING
change the type of display information:
– The display shows in turn: STATION NAME ->
FREQUENCY -> PROGRAM TYPE -> RADIO
TEXT -> STATION NAME ...
Note : When you press the RDS MODE button and
the display shows "NO RDS", it indicates that either
the tuned station is not transmitting RDS signal or it is
a non RDS station.
RDS Clock
Some RDS station may be transmitting a real time
clock at an interval of every minute.
Setting the time with RDS clock:
1 Press TIMER
˚
.
2 Press SET CLOCK.
– "00:00" starts flashing.
3 Press the RDS MODE button.
– If the station does not transmit RDS time or if the
RDS button is pressed before the clock time
transmission, the message "NO RDS CLOCK"
appears.
– When the RDS clock is read, the message
"READING RDS CLOCK" appears.
When the RDS clock time appears;
1 Press SET CLOCK once to confirm and store the
new time.
• If you do not wish to store the RDS clock time,
do not press the SET CLOCK, the previous set
time will be retained.
Fast Forward/Rewinding
1 You can rewind or fast forward the tape by
PROGRAM
PLAY
DBB
MODE
PROGRAM
pressing Q or R, (5 or 6 on the remote
AMPM
TIMER
SET CLOCK
SIDE
RDS
control) respectively.
MODE
CLEAR
TUNING
2 Press 9 (or STOP 9 on the remote control) to
stop fast forwarding or rewinding.
Note : It is possible to fast forward or rewind a
PROGRAM
PLAY
DBB
MODE
cassette when the set is in another source mode
PROGRAM
AMPM
TIMER
SET CLOCK
SIDE
(e.g. TUNER, CD or AUX mode).
RDS
MODE
CLEAR
TUNING
Recording from other sources
(TAPE DECK 2)
1 Press TAPE 1/2 to select TAPE 2 .
2 Load a blank cassette into TAPE DECK 2.
RECORD
PROGRAM
PLAY
FRONT
DBB
BACK
MODE
3 Press SIDE to change to the desired direction of
HSD
PROGRAM
SET CLOCK
NR
AMPM
TIMER
SIDE
the play mode.
RDS
MODE
CLEAR
– The
or
flag appears in the display,
FRONT
BACK
TUNING
depending on the side selected.
4 Press PLAY MODE to select the play mode ( å
or ∂ ).
5 Press CD, TUNER or AUX.
6 Press 0 RECORD to start recording.
– The
flag starts flashing.
RECORD
7 Press 9 to stop recording.
Note :
1 Only å or ∂ mode is available during
recording.
2 For CD recording see CD Synchro-start
recording under Compact Disc section.
3 During recording, it is not possible to listen to
another sound source.
CASSETTE DECK
TIMER
FRONT
DEMO
NR
INFRARED
R D S
SENSOR
ON/OFF
JAZZ
DIGITAL SOUND CONTROL
CD
TUNER
AUX
TAPE 1/2
INCREDIBLE
DBB
OP TIMUM
P OP
SOUND
REMOTE CONTROLLED
M 2 7- C
MINI
STEREO SYSTEM
S Y N C H R O D U B B I N G
A U T O R E V E R S E
1
TAPE
PLAYBACK/CONTINUOUS PLAY
DOLBY B NR
RECORD/PLAYBACK
Loading a cassette
• Press
.
?
• The cassette compartment door opens.
• Load the cassette with the open side downward and the full spool to the left.
– The deck automatically selects the tape type (NORMAL or CHROME
(CrO2).
• Close the cassette compartment door.
CASSETTE DECK
Dubbing cassettes
(from DECK 1 to DECK 2)
1 Load the pre-recorded cassette into TAPE DECK
1 and a blank cassette into TAPE DECK 2.
– Make sure that both cassettes have their full
spools to the left.
CD TAPE
1
SHUFFLE
FMMW
2
SW
LW
RECORD
STEREO
TIMER SET
3
2 Press SIDE to select the front side of the tape in
DUBBING
BAND
SHUFFLE
TAPE DECK 2.
TIMER
PRESET
3 Press DUBBING and then press Q or R for
respective dubbing speed mode.
– NORMAL (normal speed) or FAST (high speed)
appears on the display.
SHUFFLE
CD TAPE
1
RECORD
FMMW
FRONT
2
SW
LW
BACK
–
appears on the display for high speed
RECORD
STEREO
HSD
HSD
3
TIMER SET
NR
DUBBING
dubbing.
BAND
SHUFFLE
TIMER
PRESET
4 Press DUBBING again to start recording.
– The
flag starts flashing.
RECORD
5 Press 9 to stop dubbing.
Notes :
– At the end of side A, flip the cassettes to side B
and repeat the procedure.
– Dubbing of cassettes is only possible in the TAPE
2 mode. To ensure good dubbing, use tapes of
the same length.
– During high speed dubbing in Tape mode, the
sound is reduced to a low volume.
– You can listen to other sound source while
dubbing.
General Information
– For recording, use only a cassette of IEC type I
VOLUME
(normal cassette) or IEC type II (Chrome). The
respective cassette type is selected
automatically.
– The tape in the cassette is secured at both ends
with a leader tape. At the beginning and end of
a cassette, nothing will be recorded for six to
seven seconds.
– The recording level is set automatically,
ROCK
regardless of the position of VOLUME.
– Check and tighten slack tape with a pencil
CLA SSIC
before use. Slack tape may get jammed or may
burst in the mechanism.
B NR
– To prevent accidental recording, break out the
tab on the left shoulder of the cassette side you
want to protect. To re-record the cassette, cover
each hole with cellophane tape. Do not cover
the Chrome tape detection hole when covering
the tab opening.
–
2
TAPE
1
C-120 tape is extremely thin and may be easily
deformed or damaged. It is not recommended
for use in this unit.
– Store the cassettes at room temperature and do
not put them too close to a magnetic field (for
example, transformers, TVs or speakers).
Dolby B Noise Reduction System
The Dolby B NR System is manufactured under
license from Dolby Laboratories Licensing Corpora-
tion. The word Dolby and the
d
symbol are trade-
marks of Dolby Laboratories Licensing Corporation.
1 Press
d
B NR to switch on Dolby B NR.
RECORD
PROGRAM
PLAY
FRONT
DBB
BACK
MODE
PROGRAM
HSD
NR
SET CLOCK
– The
indication appears in the display.
AMPM
TIMER
d
NR
SIDE
RDS
MODE
CLEAR
2 Press
d
B NR again to switch off Dolby B NR.
TUNING
– The
d
indication disappears from the
NR
display.
Notes:
– A tape recorded with the Dolby B NR system
PROGRAM
PLAY
DBB
MODE
PROGRAM
should also be played in the Dolby B NR mode.
AMPM
TIMER
SET CLOCK
SIDE
RDS
If you forget to operate the DOLBY NR button,
MODE
CLEAR
TUNING
the treble may be reproduced too strongly or too
faintly.
– The
d
B NR button has no influence during
dubbing (dubbing from TAPE 1 to TAPE 2). An
original tape recorded with Dolby B NR auto-
matically produces a copy with Dolby B NR.
Werbung
Inhaltsverzeichnis
