Inhaltsverzeichnis
Werbung
Allgemeiner Teil / General Section
Timer
The system can switch on to CD or TUNER
mode automatically at a preset time.
It can serve as an alarm to wake you up.
• Before setting the timer, make sure the
clock is set correctly.
• The volume of the timer will be at the last
setting before the set was switched off.
• The timer works every day on the same
time unless it is switched off or cancelled.
• The volume of the timer will be at the last
setting before the set is switched off.
• If both Sleep Timer and normal Timer are
set simultaneously, the Sleep Timer has
the priority in operation.
Setting the Sleep Timer
You can let the unit be switched off at a
preset time period.
This allows you to fall asleep while listening
to music.
• Press 4 times TIME/SLEEP on the unit or
on the remote control.
– SL -0 appears on the display.
• The 'sleep' time can be reduced in 10
minutes steps from 90 minutes to off, by
pressing repeatedly the PROGRAM
button.
Cassette playback
Playback on TAPE A or B
• Press TAPE to switch the system on and to
select the cassette deck.
• Press STOP EJ. on TAPE A and/or B to open
the cassette holder.
• Insert a recorded cassette.
with the open side down-
ward and the full spool to
the left.
• Press PLAY and playback
will start.
• Adjust the sound using the VOLUME control.
– Playback stops when the tape in the deck
reaches the end of the current side.
• For brief interruptions, press PAUSE.
– To restart playback, press this button once more.
• To stop, press STOP/EJ. on TAPE A or B.
– When the end of the tape is reached the
PLAY button is released.
Playback on TAPE A and B
• Press both STOP EJ. buttons and insert
recorded cassettes in both decks.
• Press PLAY on TAPE B. Then press PAUSE and
PLAY on TAPE A.
– Playback begins with TAPE B.
– Playback stops when the tape in TAPE B
reaches the end of the current side.
– The PAUSE button will automatically be
released and playback continues with TAPE A.
• To stop, press STOP/EJ. on TAPE A and B.
– The set is then switched off.
Note: When you press STOP/EJ. on TAPE B,
playback will continue with TAPE A.
1 - 10
TIMER
TIMER
ON
. .
TIMER
ON
. .
.
TIMER
OFF
. .
TIMER
OFF
. .
B
TRACK
SLEEP
.
B
TRACK
SLEEP
.
B
TRACK
SLEEP
.
CASSETTE DECK
Recording (TAPE A only)
Recording from the CD-player
• Press STOP EJ. to open the cassette holder of
TAPE A.
• Insert a blank cassette.
• Press the CD PLAY/PAUSE B; button twice to
select the pause mode.
• Press RECORD
– The CD player starts automatically.
– When the end of the tape is reached, the
recording will stop.
• Press STOP EJ. if you want to stop recording
before the end of the tape.
Recording from the radio
• Press STOP EJ. to open the cassette holder of
TAPE A.
• Insert a blank cassette.
• Press the TUNER button.
• Tune to desired radio station
• Press the PAUSE button and then the RECORD
button on TAPE A.
– The PLAY button will go down automatically.
• Release the PAUSE button to begin recording.
– When the end of the tape is reached, the
recording will stop.
• Press STOP/EJ. if you want to stop recording
before the end of the tape.
Automatic level control
This unit has a built-in automatic level control circuit
that electronically adjusts the recording level from
any source. Therefore, recording and dubbing are
not affected by the settings of the VOLUME,
PRESET EQ, or UBS controls.
Setting the Timer
• Select the desired source CD or TUNER and insert
a CD or select a preset station.
• Press twice the TIME/SLEEP button on the system or
on the remote control. The display will show '
' and the actual time.
ON
• Press the PROGRAM button. The hour indication
flashes.
• Set the hour for the timer to start with PRESET Q
and R on the unit or PRESET # $ on the remote
control.
• Press the PROGRAM button again. The minute indication
flashes.
• Set the minutes for the timer to start with PRESETQ
and R on the unit or PRESET # $ on the remote
control and press PROGRAM to store the time.
• Press the TIME/SLEEP button.
– The display will show '
' and the actual
TIMER OFF
time.
• Press the PROGRAM button. The hour indication
flashes.
• Set the hour for the timer to stop with PRESET Q
and R on the unit or PRESET # $ on the remote
control.
• Press the PROGRAM button. The minute indication
flashes.
• Set the minutes for the timer to stop with PRESET
Q and R on the unit or PRESET # $ on the
remote control and press PROGRAM to store the time.
• Press twice the TIME/SLEEP button.
– The CD or radio display appears.
• Press TIMER ON. The
flag starts flashing.
TIMER
• Press ON/OFF y to switch off the set
You can also use the SLEEP TIMER to turn the unit
off at a preset time.
DUBBING - Copying from TAPE B to A
• Press the TAPE button.
• Press both STOP/EJ. buttons
and insert a recorded
cassette into TAPE B and a
cassette which is suited for
recording into TAPE A.
• For high speed dubbing,
press the HIGH SPEED DUBBING button until
appears on the display.
HIGH SPEED
– For higher quality dubbing, press the HIGH
SPEED DUBBING again until
HIGH SPEED
appear on the display anymore.
• Press the PAUSE button and then the RECORD
button on TAPE A.
– The PLAY button will go down automatically.
• Press the PLAY button on TAPE B; the PAUSE
button on TAPE A will be released and dubbing
will start.
– The tape in TAPE A will stop at the end of the
first side.
– The tape in TAPE B will play one side of the tape
and then stop.
• To stop dubbing before the end of the tapes,
press both STOP/EJ. buttons.
Full Automatic Stop
• TAPE A and B have a built-in Full Automatic Stop
System that stops the tape when it reaches the
end in all modes.
• To stop the tape before it reaches the end, press
the STOP/EJ. button.
M 14
TIMER
does not
GRUNDIG Service
Werbung
Inhaltsverzeichnis
