Moving The Tea Basket When Not In The Brewing Cycle - SOLIS Typ Bedienungsanleitung

Re-selecting the 'Auto Start' feature using previous START TIME
1. Press the AUTO START button once. The HOT WATER|Cancel and TEA|Cancel but-
tons will flash.
2. Press either the HOT WATER|Cancel or TEA|Cancel button to re-select the desired
function. The 'Auto Start' feature has now been re-set.
NOTE: The 'Auto Start' feature can be canceled anytime by pressing the AUTO
START button. The LCD screen will no longer display the
bol and the AUTO START button surround will cease to illuminate.
■
A NOTE ON STANDBY MODE
When the Tea Maker is plugged into a wall outlet, the LCD screen will illuminate for
3 minutes before entering standby mode. When in standby mode, the backlight of
the LCD screen will switch off and the current time will appear on the display.
To re-activate the Tea Maker out of standby mode, press any button, except the HOT
WATER|Cancel or TEA|Cancel button on the Power Base. The LCD screen will re-il-
luminate. Pressing either the HOT WATER|Cancel or TEA|Cancel button will start the
respective operation immediately.
■
MOVING THE TEA BASKET WHEN NOT
IN THE BREWING CYCLE
After the brewing cycle is complete, you may wish to lower the Tea Basket again for
extra infusion to produce a stronger tasting tea. To do this, press and hold the BAS-
KET button for 2 seconds. The button surround will flash and the Tea Basket will au-
tomatically lower to the bottom of the Glass Jug.
Once the desired strength has been reached, press and hold the BASKET button for
2 seconds. The button surround will flash and the Tea Basket will automatically rise
to the top of the Glass Jug.
NOTE: If the Glass Jug is removed from the Power Base and the Tea Basket is
in the lowered position, it will automatically return to the top upon return
of the Glass Jug to the Power Base.
AUTO START sym-
117