Redialling The Last Dialed Numbers - TIPTEL easyDECT 3300 Bedienungsanleitung

easydect3300-uk.qxd

4.2 Redialling the Last Dialed Numbers

Your phone allows you to quickly call again the last
20 dialed numbers.
4.2.a Searching for and Dialing a Number in
Outgoing Calls List
1. In Standby mode, press the LIST soft key.
2. If necessary, press the
choose 1:Outgoing Call, and press the SELECT
soft key. The list of outgoing calls is displayed.
3. Scroll through the outgoing calls list using
the or
number, and press the SELECT soft key. You
will also see the name (if available) and the
date/time in which you did the call as well as
its duration. If the number was previously
entered in the phonebook, you can also see its
associated name.
4. To place a call to the number, press the
key.
To return to Standby mode, press the
✍ At step 2, if the list is empty, the phone informs you
about that with the message Redial list empty and
returns in Standby mode.
4.2.b Using Outgoing Calls Options
C L
ALL ISTS
28
14.11.2003 15:57
or key to
key until you find the desired
key.
Seite 28
Using the outgoing calls options, you can edit, save, or
delete a number in the outgoing calls list.
1. Find the desired number in the outgoing calls
list as per the steps 1 through 3 in the par.
4.2.a.
2. Press the OPTION soft key to display the
option menus.
3. Press the or key to choose the desired
option:
• Edit: allows you to edit the number. Use the
CLEAR soft key to delete the last entry (after
editing the number, you can save it in the
phonebook with the following option or place a
call to the number).
• Save number: allows you to save the number in
the phonebook. Complete storing the entry by
starting from step 3 described in the paragraph
4.1.a (obviously, at step 4 you will find the
number already entered in the appropriate field).
• Delete: allows you to delete the selected num-
ber.
• Delete All: allows you to delete the whole redial
list (a message asks if you really want to
delete all the entries). Press the SELECT soft
key to confirm or CANCEL to exit without
deleting the entries).
4. To return to Standby mode, press the key.