Locking Keys On Handset; Paging - TIPTEL easyDECT 3300 Bedienungsanleitung

easydect3300-uk.qxd

3.15 Locking Keys on Handset

This function is useful to avoid unwanted function
activations by accidentally pressing any keys when
you are carrying your handset. If you activate the
key lock, of the keys are inhibited, except for the
one.
In this condition, when a call comes in, you can
answer the call by pressing any key. When the call
ends, the keys will be locked again.
To lock the keys, in the Standby mode just keep

3.16 Paging

You can page the handset from the base unit making
it ringing with a special ring. It's useful to locate a
lost handset or call the user who currently has the
handset.
To send the paging signal, press the Paging key
located in the bottom of the base. All the phones
which are registered with the base ring for 30
seconds.
✍ If a call comes in while the handset is being paged, the
handset stops the paging operation and starts ringing
normally in order to allow you to answer the call.
14.11.2003 15:56
Paging key
Seite 23
the key pressed till the display shows KEY
LOCK.
To unlock the keys keep the
again till the KEY LOCK message disappears from
the display.
✍ If you switch the handset off and on again, the key lock
is automatically disabled.
To stop the paging signal before 30 seconds are
passed, press the Paging key again or any keys
on the handset(s).
B
key pressed
F
ASIC UNCTIONS
23