Installing The Battery - TIPTEL easyDECT 3300 Bedienungsanleitung

easydect3300-uk.qxd
2.2

Installing the battery

The rechargeable Ni-MH battery comes with your
phone. Install the battery before using your phone.
1. Slide the battery cover in the direction of the
arrow, and remove it.
4. Insert the battery in the compartment.
5. To replace the battery cover, slide the cover
up until it snaps in place taking care not to
damage the wires.
! A wrong matching of the connectors or an excessive
force can damage them
! Handle the battery properly. Strictly follow the
directions stated in the par. 3.13
S U
ETTING P
8
14.11.2003 15:56
Battery socket
Seite 8
2. Remove the old battery (in case of battery
replacing only)
3. Point the battery connector toward the socket
at the bottom of the battery compartment end
make them matching, then gently plug the
battery connector into the socket
✍ If the phone was previously used, please check the bat-
tery efficiency and replace it, if necessary.